MDF Sanding Premium Polyester Silicon Carbide Segmented Belt /
WEEM premium segmented wide belt is special make and mark 1128. It
make with heavy duty YY weight polyester backing place premium
silicon carbide gain, Special design for heavy duty MDF boards’
surface sanding. With custom sectional belt, WEEM make into belt’s
length up to 3200mm with 2 joints. Best Choice for Surface
Finishing of MDF, Particleboard and Plywood Panels.
Woodworking /MDF/HDF/OSD/Partial board/Chip board/
WEEM premium segmented wide belt is Special design for heavy duty
MDF boards’ surface sanding. We understand that segmented belt have
a special requirement for the backing to sustain warp and weft
cross-direction strength, a YY weight waterproof polyester backing
is the best choice. We have careful choose very fine cloth backing provided both
stiffness strength and tensile strength, idea for sectional belt
requirement. Anti-static treatment made on backing to delay or prevent loading
Care selection of gains, only premium silicon carbide is selected.
Silicon carbide is a very hard and crystal structure produces a
fine straight edged grind lines. It is superior for its ability to
penetrate with light cutting pressures. SiC is primarily used for
grinding nonferrous materials such as brass, copper, bronze, and
wood, glass, rubber and plastics. It is also used to finish
polyurethanes, primers, lacquers and sealers.
And use closed coated technique bond on the backing to ensure the
grinding and durable needs. A closed coat product has a higher
number of abrasive cutting points per square inch and results in
higher stock removal rate and longer time before the abrasive wears
out. Normally results in a better finish.
A sectional belt or segmented belt is custom make to your ordered.
For panel industrial, the belt size can be 1950mm x 3200mm or
2650mm x 3200mm etc.
A strong bi-direction tape splice is used. Joint of WEEM premium
MDF segmented belt offer joint like this:
Tap on gain line joint: as default.
YY weight waterproof polyester
1828mm/72” ~ 3300mm/130”
It is made for wide belt sander, such as: Steinemann, Imeas, etc.
it offer great performance and durable with heavy duty grinding and